The Golden Stitch Difference You Can See
肉眼可见的金缝品质差异
Every stitch we make follows 12 stitches per inch standard, 30% denser than the industry average, to ensure garments can withstand 50+ washes without deformation.
我们的每一针都严格遵循每英寸12针标准，比行业平均密度高30%，确保服装经过50次以上水洗不变形。
每英寸标准针数
We never cut corners on core craftsmanship details. Our team of 200+ veteran sewing artisans (with 10+ years of industry experience) adhere to strict internal quality benchmarks that exceed standard industry requirements for every single piece that leaves our factory.
我们从不在核心工艺细节上偷工减料。200+拥有10年以上行业经验的资深缝纫工匠，对每一件出厂的产品执行远超行业标准的内部质量基准。
4-Step Zero-Defect Quality Inspection
4步零瑕疵质检流程
Incoming Fabric Check
来料面料检测
All fabrics are tested for color fastness, shrinkage rate and defect rate before entering production. Non-compliant materials are returned immediately.
所有面料投产前均检测色牢度、缩水率和瑕疵率，不合格物料直接退回。
Inline Sewing Inspection
生产中缝纫巡检
QC inspectors check every 20 pieces on the production line to correct stitch tension, seam alignment and sizing issues in real time.
质检人员在线上每生产20件即抽检一次，实时修正针脚张力、缝位对齐和尺寸偏差。
Detail Finishing
细节整理工序
Specialized workers trim all loose threads, press every seam flat and attach labels/hangtags with full compliance to client requirements.
专职工人修剪所有零线头，平整熨烫每一道缝位，按客户要求完整附吊牌/标签。
Pre-Shipment Full Sampling
出货前全量抽检
We perform AQL 2.5 standard final inspection before packing, and provide full inspection reports for every bulk order shipment.
包装前执行AQL 2.5标准终检，每批大货都提供完整质检报告。
Built to Last Design Details
耐穿耐用的设计细节
✓
Reinforced seam design at all stress points (shoulders, pockets, cuffs)
所有受力点（肩部、口袋、袖口）均采用加固缝工艺
✓
Pre-washed and pre-shrunk fabric to eliminate post-wash size deviation
面料预水洗预缩处理，彻底消除水洗后尺寸偏差
✓
Zero loose thread tolerance standard before final packaging
终包装前执行零跳线零线头验收标准
✓
Color-matched thread on all seams for a clean, premium finish
所有缝位采用同色线，保持整洁高端的成品外观